(877) 371-514524/7 Service
Book

Marietta, Georgia

Fiberglass Boat Disposal in Marietta, Georgia

Fiberglass hull pickup for Marietta owners the landfill turned away. We tow it whole, cut it at our yard, and route the material to a processor.

Licensed & Insured Cobb County crews Hull Cutting Included
GET FREE QUOTE (877) 371-5145

Fiberglass boat disposal in Marietta starts at $400 and covers pickup, hull cutting at our yard, and disposal in one visit.

ZIPs in Marietta:30006, 30007, 30008, 30060, 30061, 30062, 30063, 30064, …
Cobb County:Roswell, Smyrna, Mableton, Kennesaw, Acworth, Powder Springs
Fiberglass hulls:cut at our yard, never on site
Dale's take on Marietta

I get calls from two kinds of people in Marietta. First, there's the owner who listed their fiberglass boat for a full season, got nothing but free-seekers and tire-kickers, and finally admitted it wasn't selling. The repair quote beat the resale value by two thousand dollars. Second is the person who inherited the backyard problem, or it came with the house they bought. Either way, the landfill already said no. The scrap yard only wants the trailer. And the boat sits there, rotting fiberglass that nobody will touch.

We handle fiberglass boat disposal from Marietta through Cobb County and into Fair Oaks and Smyrna on the same trip. I show up, we tow the old boat out whole, and it's gone start to finish. Missing title, no paperwork, storage lot rust. None of that stops the job. The details on how we process the hull and where it goes live on the Georgia fiberglass boat disposal page, but the part you care about is simple: you call, we come, the junk boat leaves your driveway.

What's covered

What fiberglass boat disposal covers in Marietta

Fiberglass boat disposal in Marietta means your vessel leaves your property whole on our trailer, never cut up in your driveway or side yard. We haul it to our controlled yard where the hull gets cut down in a dust-managed bay. Fiberglass, metals, and hardware route to a processor that accepts all three. Salvage value gets credited back to you. A soft transom, cracked gelcoat, or hull chalked from years outside doesn't change the plan. Whether your boat sits in a storage lot near Kennesaw State University or a barn outside Kennesaw, the process is the same. The steps below show how scheduling works.

Also in Marietta:sailboat disposal · boat hauling. See the Georgia Fiberglass Boat Disposal hub for state-level coverage and pricing.

Dale Hanson, owner, Hansons Boat Removal. Twenty years hauling boats out of driveways, marinas, and backyards across the country.

A job we ran in Marietta

Reinell 190 removal Marietta GA

Marietta, GA: 19 ft Reinell Gone in One Morning

A 19 ft Reinell 190 bowrider sat in a Marietta driveway with a cracked engine block, the result of sitting through a hard freeze without winterization. The fiberglass hull was sound, but the powerplant was gone. The trailer was serviceable, which helped, but the boat had settled into the yard over time and the access was tight, with a narrow gate and a turn that didn't leave much room for the hauler.

Read the full job

Recent jobs near Marietta

How fiberglass boat disposal in Marietta works

  1. 1

    Send photos and the pickup ZIP

    Hull length, condition (transom, floor, gelcoat), and where the boat sits in Marietta. Photos beat descriptions — send even the ugly angles.

  2. 2

    Get a firm quote back the same day

    One number for pickup, hull cutting at our yard, and disposal at a processor. No hourly, no dust fees, no per-foot surcharges added later.

  3. 3

    Schedule the pickup in Marietta

    We coordinate with the property owner or storage lot. The window is confirmed the day before, and the crew calls when they are an hour out.

  4. 4

    Tow out whole — never cut on site

    Crew loads the hull whole and hauls it to our yard. No fiberglass dust in your driveway, no torches on your property. The trailer goes with the boat when you want it gone.

  5. 5

    Cut at yard, processor, documentation

    Hull is cut down at our yard where the dust is controlled and routed to a processor that accepts fiberglass. You get proof of disposal and the hull ID record for insurance close-out.

    Metals and hardware go to recyclers first. Fiberglass is routed to a processor equipped for it. Nothing marketable ends up in a landfill.

The starting number at the top of this page is real. Hull length, condition, and distance to our yard move it from there. The full breakdown lives on the Georgia fiberglass disposal pricing section.

Common questions about Marietta fiberglass boat disposal

How much does it cost to get rid of a fiberglass boat in Marietta?
Depends on hull length and condition. The pricing section above shows how it lands in Marietta. Photos and a ZIP get you a firm number that holds through the day.
Will a landfill or scrap yard take a fiberglass boat in Marietta?
The refusal is why most calls come in. Scrap yards want the trailer or nothing; landfills want the hull nowhere near them. We take the boat, the trailer, and the hardware together.
Can fiberglass boats be recycled?
Fiberglass recycling exists but it is not cheap or straightforward. Hulls get ground down or shipped to specialized processors; metal fittings recycle easiest. We route what we can toward recycling and dispose of the rest properly.
Can I cut up a fiberglass boat myself?
Physically yes, but the dust is nasty and the disposal side is still a problem after the cutting is done. Better to let us tow it out whole and cut it at our yard, where the setup handles the dust and the processor takes the pieces.
Is an old fiberglass boat worth anything?
Rarely as a whole boat. The motor and trailer sometimes carry salvage value, and usable hardware can shift the number. Send photos and we tell you which pieces still have life left.
Do I need a title to dispose of a fiberglass boat in Marietta?
Missing paperwork does not stop the pickup. Titling questions for Georgia live on the boat-removal page, in the legal section. Proof of disposal comes back to you when the job is done.
Is fiberglass boat disposal ever free in Marietta?
Sometimes, if a donation program will take the boat with value on the inspection. A dead hull rarely qualifies. If salvageable pieces offset the cost enough to make it free, we say so before booking.

Other services we offer in Marietta

Whatever the job, our Georgia crews handle it. Click any service for local details.

Sailboat DisposalAvailable in Marietta Boat HaulingAvailable in Marietta

Fiberglass boat disposal around Marietta, Cobb County

MabletonLocal fiberglass boat disposal service KennesawLocal fiberglass boat disposal service AcworthLocal fiberglass boat disposal service Powder SpringsLocal fiberglass boat disposal service ViningsLocal fiberglass boat disposal service Fair OaksLocal fiberglass boat disposal service AustellLocal fiberglass boat disposal service Kennesaw State UniversityLocal fiberglass boat disposal service
All Georgia cities

Get a free fiberglass boat disposal quote in Marietta

Send photos, hull length, and where the boat sits in Marietta. One firm number covers pickup, hull cutting at our yard, and disposal. Landfill refusals and stalled restorations welcome.

Call Now: (877) 371-5145GET FREE QUOTE
Get Quote(877) 371-5145